The Ball Lock Mounting System is designed to speed accurate locating and
locking of fixture plates and subplates with up to 9,00kg of hold-down
force per shank. The system consists of three parts; a locating Shank, a
Liner Bushing and a Receiver Bushing. The Ball lock system accurately
positions your workpiece to within 0.013mm repeatability minimising the
need to clock your fixture.
Using the Ball Lock Mounting System
is a simple three step process. Install receiver bushings in your
machine table or subplate, and liner bushings in your fixture plate,
then insert the locating shanks through the liners and into the
receivers to provide accurate location.