Milling | Environment | Mist Extraction - Soft Jaw and Hard Jaw Manufacture, Accessories and Workholding for CNC Machine Tools for Australia and NZ

You are here: milling / environment / mist extraction

Environment
- Mist Extraction

Mist Extraction

REVEN GmbH Sersheim Germany has developed the X-Zyklon system.Air Pollution, toxic substances originating from oil and other liquid substances are mechanically separated out of air stream with high efficiency.

The system works without additional energy(IE electricity, compressed substances) and does not need any additional aids( IE pollutant collection agents, sprays, etc.) It is designed for the separation of air pollutants in the form of; aerosol, mist and steam.

Separation Technology

Step 1 - Pre-separation through disturbance in chamber where the air forcefully gain velocity

Step 2 - Vortices created in chamber create a high speed cyclonic action causing the heavier particles to collide and adhere to the separator

profile section. This action is effective on even the lightest particles

Step 3 - Post - Separation where separation occurs again due to expansion and loss of velocity. Further separation of the smallest particles is

created due to accumulation and disturbances in the last chamber

Recojet - 1

The complete solution, plug in ready to operate. Eliminates the inherent problems of centrifugal systems such as noise, strong vibration and low separation efficiency.
Up to four filter stages

Dynamically balanced high performance blower

Flame barrier for fire protection & Built in sound attenuator

Light weight construction and compact design maintenance free X-Cyclon filter system

Proven separation efficiency

Dynamically & statically balanced filter unit

Optional Ventury Pipe attachment for high pressure vapour separation

Mist Extraction

Recojet with X-Cyclone Profile

Model: Mist extraction for machine tools

Brand: Reven

More Detail

Recojet - 1

Model: REV-Rec-1

Brand: Reven

More Detail

REVEN Ultra Cleaner

Model: REV-UC

Brand: Reven

More Detail

REVEN Ultra Cleaner Elektro

Model: REV-UCE

Brand: Reven

More Detail

Dimac Tooling is Australia and New Zealand's leading hard jaw and soft jaw manufacturer, and supplier of accessories and workholding solutions for CNC Milling and CNC Turning Machine Tools.

Workholding

Workholding cont.

Coolant

Coolant cont.

Environment

Tooling

Metrology

Swarf Crushing

Work Handling

Workholding

Workholding cont.

Rotary Tables

Indexers

Coolant

Environment

Tooling

Metrology

Swarf Crushing

Separation Technology

Recojet - 1